-- background: 8347 from stack: in.7
-- bmap block id: 9173
-- flags: 0000
-- background id: 0
-- name: BlankChaptBkgnd


-- part 1 (button)
-- low flags: 00
-- high flags: 2000
-- rect: left=21 top=288 right=315 bottom=88
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 1
-- font id: 0
-- text size: 12
-- style flags: 0
-- line height: 16
-- part name: Quit
----- HyperTalk script -----
on mouseUp
  if short name of this card is "TpcLstTmplt" then exit mouseup
  answer "Perhaps you accidently pressed Quit?" with "Yes I did" or "No I didn't"
  if it is "No I didn't" then domenu "Quit Hypercard"
end mouseUp




-- part 4 (field)
-- low flags: 01
-- high flags: 2007
-- rect: left=254 top=0 right=342 bottom=512
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 0
-- font id: 3
-- text size: 9
-- style flags: 0
-- line height: 12
-- part name: TpcLstFld
----- HyperTalk script -----
on mouseup
  global chapt,UserChoice,NtHeader
  Put the number of words in field "TpcLstFld" into NumWords
  if NumWords is 0 then exit mouseup
  set locktext of field "TpcLstFld" to false
  put item 2 of the clickloc into Ln
  put item 1 of the rect of field "TpcLstFld" into Left
  add 6 to Left
  put item 3 of the rect of field "TpcLstfld" into Right
  subtract 19 from Right
  click at Right,Ln
  click at Left,Ln with shiftkey
  if the selection is empty then
    beep 2
    click at 0,0
    set locktext of field "TpcLstFld" to true
    put number of lines in field "TpcLstFld" into LastLn
    repeat with x = 1 to LastLn
      if line x of field "TpcLstFld" is empty then
        delete line x to lastLn of field "TpcLstFld"
        exit repeat
      end if
    end repeat
    exit mouseup
  end if
  set locktext of field "TpcLstFld" to true
  put the selection into NtHeader
  repeat with x = 1 to NumWords
    if the selection is line x of field "TpcLstFld" then exit repeat
  end repeat
  put line x of field "TpcOrdrFld" into TopicNum
  put Chapt & TopicNum into UserChoice
  visual effect zoom open slowly
  go to card UserChoice
  if the result is not empty then NoNtCrd
  if the number of card fields is 1
  then put IBeam("TxtFld") into dummy
end mouseup



-- part 5 (button)
-- low flags: 00
-- high flags: 2000
-- rect: left=93 top=288 right=315 bottom=160
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 1
-- font id: 0
-- text size: 12
-- style flags: 0
-- line height: 16
-- part name: Chapter List
----- HyperTalk script -----
on mouseUp
  if short name of this card is "TpcLstTmplt" then exit mouseup
  go to card "ChptLstCrd"
end mouseUp




-- part 16 (field)
-- low flags: 81
-- high flags: 0007
-- rect: left=86 top=103 right=215 bottom=150
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 0
-- font id: 3
-- text size: 9
-- style flags: 0
-- line height: 12
-- part name: TpcOrdrFld


-- part 21 (button)
-- low flags: 00
-- high flags: 2000
-- rect: left=21 top=256 right=283 bottom=88
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 1
-- font id: 0
-- text size: 12
-- style flags: 0
-- line height: 16
-- part name: Add Topics
----- HyperTalk script -----
on mouseup
  if short name of this card is "TpcLstTmplt" then exit mouseup
  put short name of this card into Chapt
  put the number of chars in Chapt into NumChars
  put 0 into ChaptNum
  repeat with x = NumChars down to 1
    get 26 ^ (x - 1) * ((CharToNum of char x of Chapt) - 65)
    add It to ChaptNum
  end repeat
  repeat while true
    put the number of lines in field "TpcLstFld" + 1 into TopicNum
    put "Name Topic" && TopicNum && "of Chapt" && ChaptNum into Prompt
    ask prompt
    if it is empty then
      exit mouseup
    end if
    put it into UsrTpcNam
    put UsrTpcNam & return after field "TpcLstFld"
    put TopicNum & return after field "TpcOrdrFld"
    set cursor to 4
    set lockscreen to true
    put MakeCard("NtTmplt") into dummy
    put Chapt & TopicNum into NtCrdNam
    set the name of this card to NtCrdNam
    put UsrTpcNam into field "HeaderFld"
    go to card Chapt
    set lockscreen to false
    flash 2
  end repeat
end mouseup


-- part 22 (button)
-- low flags: 00
-- high flags: 2000
-- rect: left=93 top=256 right=283 bottom=160
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 1
-- font id: 0
-- text size: 12
-- style flags: 0
-- line height: 16
-- part name: Rename
----- HyperTalk script -----
on mouseUp
  if short name of this card is "TpcLstTmplt" then exit mouseup
  Put the number of words in field "TpcLstFld" into NumWords
  if NumWords is 0 then
    beep 1
    exit mouseup
  end if
  ask "Rename what Topic?"
  if it is empty then exit mouseup
  put hilite of bkgnd button "ExactMtch" into ExactMatch
  set cursor to 4
  repeat with LnNum = 1 to NumWords
    if Exactmatch then
      if It is line LnNum of field "TpcLstFld" then
        exit repeat
      end if
    else
      if It is in line LnNum of field "TpcLstFld" then
        exit repeat
      end if
    end if
    if LnNum is NumWords then
      beep 1
      put "The name you entered is not in the list!"
      wait 2 seconds
      hide msg
      exit mouseup
    end if
  end repeat
  set cursor to 1
  put "Enter New Title for Topic" into prompt
  ask prompt
  if it is empty then exit mouseup
  put it into NewTitle
  put it into Hdr
  put line LnNum of field "TpcLstFld" into Temp
  put the number of chars in Temp into EndChar
  repeat with NonSpc = 1 to EndChar
    if char NonSpc of Temp is not " " then exit repeat
  end repeat
  put NewTitle into char NonSpc to EndChar of line LnNum of field "TpcLstFld"
  set cursor to 4
  set lockscreen to true
  put short name of this card into LetterName
  put line LnNum of field "TpcOrdrFld" into TpcOrdrNum
  put LetterName & TpcOrdrNum into RenamedCrd
  go to card RenamedCrd
  put Hdr into field "HeaderFld"
  repeat while true
    go to next card
    if short name of this card is "@" then
      put "…" && Hdr && "cont." into field "HeaderFld"
    else
      exit repeat
    end if
  end repeat
  go to card LetterName
  set lockscreen to false
  flash 2
end mouseUp


-- part 23 (button)
-- low flags: 00
-- high flags: 2000
-- rect: left=165 top=256 right=283 bottom=232
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 1
-- font id: 0
-- text size: 12
-- style flags: 0
-- line height: 16
-- part name: Delete
----- HyperTalk script -----
on mouseUp
  put number of lines in field "TpcLstFld" into LstTNum
  if LstTNum < 2 then
    beep 1
    put "Can't delete last topic!"
    exit mouseup
  end if
  ask "Delete which topic?"
  if it is empty then exit mouseup
  put it into DelChoice
  put hilite of bkgnd button "ExactMtch" into ExactMatch
  set cursor to 4
  repeat with UDelNum = 1 to LstTNum
    if Exactmatch then
      if DelChoice is line UDelNum of field "TpcLstFld" then
        exit repeat
      end if
    else
      if DelChoice is in line UDelNum of field "TpcLstFld" then
        exit repeat
      end if
    end if
    if UDelNum is LstTNum then
      beep 1
      put "The name you entered is not in the list!"
      wait 2 seconds
      hide msg
      exit mouseup
    end if
  end repeat
  put line UDelNum of field "TpcOrdrFld" into ADelNum
  put short name of this card into ChptNam
  if ADelNum is LstTNum then
    delete line UDelNum of field "TpcOrdrFld"
    delete line UDelNum of field "TpcLstFld"
    set cursor to 4
    set lockscreen to true
    go to card ChptNam & ADelNum
    domenu "delete card"
    repeat while short name of this card is "@"
      domenu "delete card"
    end repeat
  else
    repeat with x = 1 to LstTNum
      if line x of field "TpcOrdrFld" is LstTNum then exit repeat
    end repeat
    put ADelNum into line x of field "TpcOrdrFld"
    delete line UDelNum of field "TpcLstFld"
    delete line UDelNum of field "TpcOrdrFld"
    set cursor to 4
    set lockscreen to true
    go to card ChptNam & ADelNum
    domenu "delete card"
    repeat while short name of this card is "@"
      domenu "delete card"
    end repeat
    go to card ChptNam & LstTNum
    set name of this card to ChptNam & ADelNum
  end if
  go to card ChptNam
  set lockscreen to false
  flash 2
end mouseUp




-- part 24 (button)
-- low flags: 00
-- high flags: 2000
-- rect: left=165 top=288 right=315 bottom=232
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 1
-- font id: 0
-- text size: 12
-- style flags: 0
-- line height: 16
-- part name: Insert
----- HyperTalk script -----
on mouseup
  if short name of this card is "TpcLstTmplt" then exit mouseup
  put number of lines in field "TpcLstFld" into TtlNumTpcs
  if TtlNumTpcs is 0 then exit mouseup
  put short name of this card into Chapt
  put "Name for inserted Topic?" into prompt
  ask prompt
  if it is empty then exit mouseup
  put it into InsertedName
  put "Insert after what topic? [none]" into prompt
  ask prompt
  if it is empty then exit mouseup
  put it into AfterName
  put hilite of bkgnd button "ExactMtch" into ExactMatch
  set cursor to 4
  if AfterName is "none" then
    put 1 into UsrTpcNum
  else
    repeat with x = 1 to TtlNumTpcs
      if Exactmatch then
        if AfterName is line x of field "TpcLstFld" then
          exit repeat
        end if
      else
        if AfterName is in line x of field "TpcLstFld" then
          exit repeat
        end if
      end if
      if x is TtlNumTpcs then
        beep 1
        put "The name you entered is not in the list!"
        wait 2 seconds
        hide msg
        exit mouseup
      end if
    end repeat
    put x + 1 into UsrTpcNum
  end if
  put InsertedName & return before line UsrTpcNum of field "TpcLstFld"
  set lockscreen to true
  put TtlNumTpcs + 1 into LstTpcNum
  put LstTpcNum & return before line UsrTpcNum of field "TpcOrdrFld"
  put MakeCard("NtTmplt") into dummy
  put Chapt & LstTpcNum into NtCrdNam
  set the name of this card to NtCrdNam
  put InsertedName into field "HeaderFld"
  go to card Chapt
  set lockscreen to false
  flash 2
end mouseup


-- part 25 (button)
-- low flags: 00
-- high flags: 0000
-- rect: left=140 top=225 right=241 bottom=156
-- title width / last selected line: 0
-- icon id / first selected line: 16692 / 16692
-- text alignment: 1
-- font id: 0
-- text size: 12
-- style flags: 0
-- line height: 16
-- part name: IncIndent
----- HyperTalk script -----
on mouseUp
  if field "IndentFld" is not 12
  then add 3 to field "IndentFld"
end mouseUp



-- part 26 (button)
-- low flags: 00
-- high flags: 0000
-- rect: left=98 top=224 right=240 bottom=114
-- title width / last selected line: 0
-- icon id / first selected line: 3584 / 3584
-- text alignment: 1
-- font id: 0
-- text size: 12
-- style flags: 0
-- line height: 16
-- part name: DecIndent
----- HyperTalk script -----
on mouseUp
  if field "IndentFld" is not 0
  then subtract 3 from field "IndentFld"
end mouseUp



-- part 27 (field)
-- low flags: 01
-- high flags: 0002
-- rect: left=114 top=226 right=239 bottom=138
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 1
-- font id: 3
-- text size: 9
-- style flags: 0
-- line height: 12
-- part name: IndentFld


-- part 28 (button)
-- low flags: 00
-- high flags: 2000
-- rect: left=165 top=224 right=251 bottom=232
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 1
-- font id: 0
-- text size: 12
-- style flags: 0
-- line height: 16
-- part name: IndentTpcLst
----- HyperTalk script -----
on mouseUp
  global NumTpc,XactMtch,Xit
  Put number of lines in bkgnd field "TpcLstFld" into NumTpc
  if NumTpc is 0 then exit mouseup
  put hilite of bkgnd button "ExactMtch" into XactMtch

  ask "Name first Topic to be indented"
  if it is empty then exit mouseup
  put it into fTpc
  put GetTpcNum(fTpc,"TpcLstFld") into fLnNum
  if Xit then exit mouseup

  ask "Name last Topic to be indented"
  if it is empty then exit mouseup
  put it into lTpc
  put GetTpcNum(lTpc,"TpcLstFld") into lLnNum
  if Xit then exit mouseup

  put bkgnd field "IndentFld" into NumIndent
  put empty into Spcs
  repeat for NumIndent times
    put " " before Spcs
  end repeat

  repeat with x = fLnNum to lLnNum
    put line x of bkgnd field "TpcLstFld" into Temp
    repeat while char 1 of Temp is " "
      delete char 1 of Temp
    end repeat
    put Spcs before Temp
    put Temp into line x of bkgnd field "TpcLstFld"
  end repeat
end mouseUp



-- part 30 (button)
-- low flags: 00
-- high flags: 0000
-- rect: left=22 top=237 right=250 bottom=53
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 1
-- font id: 0
-- text size: 12
-- style flags: 0
-- line height: 16
-- part name: ExactMtch
----- HyperTalk script -----
on mouseUp
  set hilite of bkgnd button "ExactMtch" to true
  set hilite of bkgnd button "PartialMtch" to false
end mouseUp



-- part 31 (button)
-- low flags: 00
-- high flags: 4000
-- rect: left=53 top=237 right=250 bottom=87
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 1
-- font id: 0
-- text size: 12
-- style flags: 0
-- line height: 16
-- part name: PartialMtch
----- HyperTalk script -----
on mouseUp
  set hilite of bkgnd button "ExactMtch" to false
  set hilite of bkgnd button "PartialMtch" to true
end mouseUp